Sculpture

Sculpture

A sculpture is a three-dimensional object, which for the purposes of this article is man-made and selected for special recognition as art. A person who creates sculpture is called a sculptor.

Materials of sculpture through history

Throughout most of history, the purpose of creating sculpture has been to produce works of art that are as permanent as is possible. So to that end, works were usually produced in durable and frequently, expensive materials, primarily bronze and stone such as marble, limestone, Porphyry, and granite. More rarely, precious materials such as gold silver, jade, and ivory were used for chryselephantine works. More common and less expensive materials were used for sculpture for wider consumption, including woods such as oak, Buxusbox and Tilialime, terra cotta and other ceramics, and cast metals such as pewter and spelter.

Sculptors are constantly searching for new ways to make art and for new materials to use. Andy Goldsworthy is notable as a sculptor for his use of almost entirely natural materials in natural settings and for creating sculptures much more ephemeral than is typical. Jim Gary used automobile parts, tools, machine parts, and hardware in his sculptures as well as stained glass. Pablo Picasso used bicycle parts for one of his most famous sculptures. Alexander Calder and other modernists made spectacular use of painted steel. Since the 1960s, acrylics and other plastics have been used as well. Despite durability being the usual objective, some sculpture is deliberately short lived -- for example, ice and sand sculptures or gas sculptures.

Sculptors often build small preliminary works called maquettes of ephemeral materials such as plaster of Paris, wax, clay, and even plasticine, as Alfred Gilbert did for 'Eros' at Piccadilly Circus, London.


Asian

Many different forms of sculpture were used in the many different regions of Asia, often based around the religions of Hinduism and Buddhism. A great deal of Cambodian Hindu sculpture is preserved at Angkor, however organized looting has had a heavy impact on many sites around the country. Also see Angkor Wat. In Thailand, sculpture was almost exclusively of Buddha images. Many Thai sculptures or temples are gilded, and on occasion enriched with inlays.


India

The first sculptures in India date back to the Indus Valley civilization (3300–1700 BCE). These are among the earliest instances of sculpture in the world. Later, as Hinduism, Buddhism and Jainism developed further, India produced bronzes and stone carvings of great intricacy, such as the famous temple carvings which adorn various Hindu, Jain and Buddhist shrines. Some of these, such as the cave temples of Ellora and Ajanta, were carved out of solid rock, making them perhaps the largest and most ambitious sculptural schemes in the world.

During the 2nd to 1st century BCE in far northern India, in what is now southern Afghanistan and northern Pakistan, sculptures became more anatomically realistic, often representing episodes of the Buddha’s life and teachings. Although India had a long sculptural tradition and a mastery of rich iconography, the Buddha was never represented in human form before this time, but only through symbols such as the stupa. This alteration in style may have occurred because Gandharan Buddhist sculpture in ancient Afghanistan acquired Greek and Persian influence. Artistically, the Gandharan school of sculpture is characterized by wavy hair, drapery covering both shoulders, shoes and sandals, and acanthus leaf decorations, amongst other things.

The pink sandstone sculptures of Mathura evolved during the Gupta period 4th to 6th century to reach a very high fineness of execution and delicacy in the modeling. Gupta period art would later influence Chinese styles during the Sui dynasty, and the artistic styles across the rest of eastern Asia. Newer sculptures in Afghanistan, in stucco, schist or clay, display very strong blending of Indian post-Gupta mannerism and Classical influence. The celebrated bronzes of the Chola dynasty (c. 850 C.E. - 1250 CE) from Southern India are of particular note; the iconic figure of Nataraja being the classic example. The traditions of Indian sculpture continue into the C20th and C21st with for instance, the granite carving of Mahabalipuram derived from the Pallava dynasty. Contemporary Indian sculpture is typically polymorphous but includes celebrated figures such as Dhruva Mistry.


China

Chinese artifacts date back as early as 10,000 BC -- and skilled, Chinese artisans have been active up to the present time -- but the bulk of what is displayed as sculpture in Euro-culture museums come from a few, select, historical periods. The first period of interest has been the Zhou Dynasty (1050-771 BC), from which come a variety of intricate cast bronze vessels. The next period of interest was the Han Dynasty ( 206 BC - 220 AD) -- beginning with the spectacular Terracotta army assembled for the tomb of the first emperor of the very brief Chin dynasty that preceded it. (Qin Shi Huang) in 210–209 BC.) Tombs excavated from the Han period have revealed many figures found to be vigorous, direct, and appealing 2000 years later.

The first Buddhist sculpture is found dating from the Three Kingdoms period (third century), while the sculpture of the Longmen Grottoes (Wei dynasty, 5th and 6th century, located near Luoyang, Henan Province) has been widely recognized for its special elegant qualities.

The period now considered to be China's golden age is the Tang Dynasty (coinciding with what in Europe is sometimes called "The Dark Ages"). Decorative figures like those shown below became very popular in 20th Century Euro-American culture, and were made available in bulk as warlords in the Chinese civil wars exported them to raise cash. Considered especially desirable, and even profound, was the Buddhist sculpture, often monumental, begun in the Sui Dynasty, inspired by the Indian art of the Gupta period, and many are considered treasures of world art.

Following the Tang, Western interest in Chinese artifacts drops off dramatically, except for what might be considered as ornamental furnishings, and especially objects in jade. Pottery from many periods has been collected, and again the Tang period stands out apart for its free, easy feeling. Chinese sculpture has no nudes --other perhaps than figures made for medical training or practice -- and very little portraiture compared with the European tradition. One place where sculptural portraiture was pursued, however, was in the monasteries.

Almost nothing, other than jewelry, jade, or pottery is collected by art museums after the Ming Dynasty ended in the late 17th century -- and absolutely nothing has yet been recognized as sculpture from the tumultuous 20th century, although there was a school of Soviet-influenced social realist sculpture in the early decades of the Communist regime, and as the century turned, Chinese craftsmen began to dominate commercial sculpture genres (the collector plates, figurines, toys, etc) and avant garde Chinese artists began to participate in the Euro-American enterprise of contemporary art.

Japan

Countless paints and sculpture were made, often under governmental sponsorship. Most Japanese sculpture is associated with religion, and the medium's use declined with the lessening importance of traditional Buddhism. During the Kofun period of the third century, clay sculptures called haniwa were erected outside tombs. Inside the Kondo at Hōryū-ji is a Shaka Trinity (623), the historical Buddha flanked by two bodhisattvas and also the Guardian Kings of the Four Directions The wooden image ( 9th c.) of Shakyamuni, the "historic" Buddha, enshrined in a secondary building at the Muro-ji, is typical of the early Heian sculpture, with its ponderous body, covered by thick drapery folds carved in the hompa-shiki (rolling-wave) style, and its austere, withdrawn facial expression. The Kei school of sculptors, particularly Unkei, created a new, more realistic style of sculpture.


Africa

African art has an emphasis on Sculpture - African artists tend to favor three-dimensional artworks over two-dimensional works. Although anthropologists argue that the earliest known sculptures in Africa are from the Nok culture of Nigeria that date around 500 BC, the art of Pharaonic Africa date much earlier than the Nok period. Metal sculptures from the eastern portions of west Africa such as Benin, are considered among the best ever produced.

Art plays an essential role in the lives of the African peoples and communities across the continent. The beauty of African art is simply in meaning. These objects mean a great deal to the people and they are of significant meaning to the traditions that produce them. Their beauty and content protect the community and the individual artists, and tell much of the artists who use them. Later exhibitions of African art in the West have been able to get much detailed catalogues that attempt to cover the art of the whole continent.

African Sculptures

Sculptures are created to symbolize and reflect the regions from which they are made. Right from the materials and techniques used, the pieces have functions that are very different from one region to the other.

In West Africa, the figures have elongated bodies, angular shapes, and facial features that represent an ideal rather than an individual. These figures are used in religious rituals. They are made to have surfaces that are often coated with materials placed on them for ceremonial offerings. In contrast to these sculptures of West Africa are the ones of Mande-speaking peoples of the same region. The Mande pieces are made of wood and have broad, flat surfaces. Their arms and legs are shaped like cylinders.

In Central Africa, however, the key characteristics include heart shaped faces that are curve inward and display patterns of circles and dots. Although some groups prefer more of geometric and angular facial forms, not all pieces are exactly the same. Also, not all pieces are made of the same material. The materials used range from mostly wood all the way to ivory, bone, stone, clay, and metal. Overall, though, the Central African region has very striking styles that is very easy to identify. With the distinctive style, one can easily tell which area the sculpture was produced in.

Eastern Africa is not known for their sculptures but one type that is done in this area is pole sculptures. These are a pole carved in a human shape and decorated with geometric forms, while the tops are carved with figures of animals, people, and various objects. These poles are then placed next to graves and are associated with death and the ancestral world.

Southern Africa’s oldest known clay figures date from 400 to 600 A.D. and have cylindrical heads. These clay figures have a mixture of human and animal features. Other than clay figures, there are also wooden headrests that were buried with their owners. The headrests had styles ranging from geometric shapes to animal figures. Each region had a unique style and meaning to their sculptures. The type of material and purpose for creating sculpture in Africa reflect the region from which the pieces are created.

Egypt

The ancient art of Egyptian sculpture evolved to represent the ancient Egyptian gods, and Pharaohs, the divine kings and queens, in physical form. Very strict conventions were followed while crafting statues: male statues were darker than the female ones; in seated statues, hands were required to be placed on knees and specific rules governed appearance of every Egyptian god. Artistic works were ranked according to exact compliance with all the conventions, and the conventions were followed so strictly that over three thousand years, very little changed in the appearance of statutes except during a brief period during the rule of Akhenaten and Nefertiti when naturalistic protrayal was encouraged.